Phase 0: General Setup

• General Setup and Project Prep
• Baseline data
  • CGM Data
  • Recent A1c
  • Get comfortable making a PR
• Hardware overview
  • Notes about deprecated hardware setups
• Information about compatible insulin pumps
  • How to check pump firmware (check for presence of PC Connect)
  • Why do I need a certain pump firmware
  • Tips for finding a compatible pump
  • Battery usage
• Information about compatible CGMs
  • Using the Dexcom receiver CGM
  • Pulling CGM data from the cloud
  • Using the Medtronic CGM
• Hardware information for Intel Edison-based setups
  • Edison
  • Lipo Battery and/or other battery supply
  • Explorer Board or another base board
    • Explorer Board antenna tuning (optional)
  • Radio stick (only if not using Explorer Board)
  • USB Cables
  • Nuts and Bolts
  • Cases
    • Hard cases
    • Soft Cases
• Next steps after you get your hardware
• Setting Up Your Intel Edison
  • Helpful notes before you get started
  • Prerequisites
    • If you’re using a Raspberry Pi - prerequisites:
    • If you’re using a Windows PC - prerequisites:
    • If you’re using a Mac to flash - prerequisites:
  • Downloading image
    • Jubilinux
  • Connecting cables and starting console
    • If you’re using a Raspberry Pi for console:
    • If you’re using a Windows PC for console:
    • If you’re using a Mac for console:
    • All platforms:
  • Flashing image onto the Edison
    • If you’re using a Raspberry Pi - starting flash:
    • If you’re using a Mac - starting flash:
    • If you’re using a Windows PC - starting flash:
    • All platforms:
  • Initial Edison Setup
  • Set up Wifi:
  • Install packages, ssh keys, and other settings
  • Troubleshooting
    • Troubleshooting the flash process
    • Troubleshooting rescue mode
    • Override DNS resolvers
    • IP address conflicts (able to ping external but not LAN addresses)
• Setting up Edison/Explorer Board on a Mac - Alpha Instructions
  • Hardware Assumptions for this page
  • High Level Recommended Rig parts list
  • Getting Physical: Build your rig/put the physical pieces together
  • Software-build your rig
    • 1. Preparing/flashing the Edison
      • 1-1. Install homebrew
      • 1-2. Install a bunch of other stuff (dfu-util, coreutils, gnu-getopt)
      • 1-3. Install lsusb
      • 1-4. Start Edison in screen mode
      • 1-5. Flash the Edison
      • 1-6. Return to the other Terminal Window that we left off of in Step 4.
      • 1-7. Now we wait and watch.
      • 1-8. Wifi for Edison
      • 1-9. Multiple wifi networks
      • 1-10. Installing packages, SSH keys, and other settings
    • 2. Installing the looping script (openaps-setup.sh)
    • 3. Personalising your closed loop
• Loops In Progress